Temp to Hire
1st Shift: 7-3:30pm (Mon-Fri)
Position Summary:
Responsible for inspection of various semi-complex parts, tools and instruments for conformance to specifications and quality standards.
Primary Responsibilities/Essential Functions:
Responsibilities may include some or all of the following:
1. Maintain accurate and up-to-date acceptance and rejection records and/or certifications systems as required by the applicable specifications.
2. Determine acceptance or rejection after inspection of parts, tools, and instruments. Identify defective conditions and test failures and prepare all appropriate documentation.
INSPECTION
3. Perform semi-complex inspection of components and shelf-life items, using a wide variety of measuring instruments to determine acceptability or rejections of parts and/or parts finish.
4. Perform inspection on assembled product using a wide variety of measuring and test equipment to determine acceptability or rejections of parts and/or parts finish.
5. Identify product and send samples out for periodic testing to outside laboratory.
6. Adapt and develop inspection set-ups to check sample parts, forgings and castings. Check tool and jig layouts.
7. Perform first article and envelope inspection, source inspections, and/or semi-complex surface plate set-ups.
8. Interpret specifications, records, charts, manuals and other data to arrive at acceptance or rejection. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards.
9. Layout and measure hole locations and centerlines on castings, forgings, and machine parts to maintain control of machining cycle during manufacture.
10. Determine acceptance or rejection after inspecting parts, tools, or instruments. Identify causes of defective conditions and test failures and prepare all appropriate documentation.
11. Investigate cause of customer return failures. Perform inspections to applicable specifications within assembly, test and shipping departments. Assist customer/government source inspectors as necessary.
12. Must be able to clearly communicate internal audit procedure during internal and external audit situations.
Qualifications (relevant experience, education and training):
1. Requires high school diploma or equivalent and 3-5 years related inspection, or calibration experience or demonstrated ability to perform described responsibilities.
2. Must be able to pass required vision exam.
3. The person in this position frequently communicates with co-workers about work product and processes and must be able to exchange accurate information in these situations. Must be able to read and understand written instructions and procedures. Demonstrates effective interpersonal communication skills as well as the ability to work in a team environment.
4. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate*** ratio, and percent and to draw and interpret bar graphs. Possess working knowledge of shop mathematics including trigonometry.
5. Preferred experience of CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5.
6. Knowledge of applicable military standards or specifications required.
7. Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures.
Typical Mental and Physical Demands:
While performing the duties of this job, the team member is frequently required to move about inside the plant to access tools, parts and materials. The team member must be able to remain in a stationary position about half the time. The team member is required to use test equipment to inspect parts. Must be able to detect and identify parts and tools and inspect work for defects and accuracy. Also expected of the team member is regular attendance, the ability to work cooperatively and professionally with others. May be required to operate forklift. May be required to move parts or equipment weighing up to 50 pounds for a distance of 30 feet.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Quick Apply
No resume? Create a new profile
1st Shift: 7-3:30pm (Mon-Fri)
Position Summary:
Responsible for inspection of various semi-complex parts, tools and instruments for conformance to specifications and quality standards.
Primary Responsibilities/Essential Functions:
Responsibilities may include some or all of the following:
1. Maintain accurate and up-to-date acceptance and rejection records and/or certifications systems as required by the applicable specifications.
2. Determine acceptance or rejection after inspection of parts, tools, and instruments. Identify defective conditions and test failures and prepare all appropriate documentation.
INSPECTION
3. Perform semi-complex inspection of components and shelf-life items, using a wide variety of measuring instruments to determine acceptability or rejections of parts and/or parts finish.
4. Perform inspection on assembled product using a wide variety of measuring and test equipment to determine acceptability or rejections of parts and/or parts finish.
5. Identify product and send samples out for periodic testing to outside laboratory.
6. Adapt and develop inspection set-ups to check sample parts, forgings and castings. Check tool and jig layouts.
7. Perform first article and envelope inspection, source inspections, and/or semi-complex surface plate set-ups.
8. Interpret specifications, records, charts, manuals and other data to arrive at acceptance or rejection. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards.
9. Layout and measure hole locations and centerlines on castings, forgings, and machine parts to maintain control of machining cycle during manufacture.
10. Determine acceptance or rejection after inspecting parts, tools, or instruments. Identify causes of defective conditions and test failures and prepare all appropriate documentation.
11. Investigate cause of customer return failures. Perform inspections to applicable specifications within assembly, test and shipping departments. Assist customer/government source inspectors as necessary.
12. Must be able to clearly communicate internal audit procedure during internal and external audit situations.
Qualifications (relevant experience, education and training):
1. Requires high school diploma or equivalent and 3-5 years related inspection, or calibration experience or demonstrated ability to perform described responsibilities.
2. Must be able to pass required vision exam.
3. The person in this position frequently communicates with co-workers about work product and processes and must be able to exchange accurate information in these situations. Must be able to read and understand written instructions and procedures. Demonstrates effective interpersonal communication skills as well as the ability to work in a team environment.
4. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate*** ratio, and percent and to draw and interpret bar graphs. Possess working knowledge of shop mathematics including trigonometry.
5. Preferred experience of CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5.
6. Knowledge of applicable military standards or specifications required.
7. Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures.
Typical Mental and Physical Demands:
While performing the duties of this job, the team member is frequently required to move about inside the plant to access tools, parts and materials. The team member must be able to remain in a stationary position about half the time. The team member is required to use test equipment to inspect parts. Must be able to detect and identify parts and tools and inspect work for defects and accuracy. Also expected of the team member is regular attendance, the ability to work cooperatively and professionally with others. May be required to operate forklift. May be required to move parts or equipment weighing up to 50 pounds for a distance of 30 feet.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.